Having Trouble Pairing To Boom 2. If your Bluetooth device won’t connect to your ULTIMATE EARS speaker, try the following: Make sure your speaker is turned on. Make sure your device is paired with your speaker and Bluetooth is active. Place your Bluetooth device closer to the speaker – it might be out of range. Untuk menghubungkan speaker Bluetooth ke laptop Windows 7, 8, atau 10, ikuti langkah-langkah berikut: Pilih perangkat Bluetooth dan klik Tambahkan Perangkat Bluetooth atau perangkat lain. Pilih speaker Bluetooth dari daftar perangkat yang muncul dan klik tombol Pair. Setelah itu, tunggu sampai laptop Windows Anda menyelesaikan proses The second approach is via the Google Home app on your Android or iOS device. Launch the Google Home app. Select the speaker you want to use. Tap the gear icon on the top-right corner. Navigate to Audio > Paired Bluetooth devices and then tap on Enable Pairing Mode at the bottom of the screen. After enabling the pairing mode using either of 2. Press and release the Bluetooth button on either speaker to select Bluetooth mode and begin the Bluetooth pairing process. The speaker you use for Bluetooth pairing will serve as the primary speaker. The Bluetooth icon on the primary speaker’s Display will flash to indicate it is searching for a Bluetooth device to pair with. 3. Navigate If you fail to connect the speaker to your device, you can try the following steps: 1. Confirm the speaker is fully charged and it's not paired with other devices. 2. Forget all Bluetooth pairing records on your device. 3. Reboot your speaker and your device. 4. Disable and enable Bluetooth on your device. 5. Reset the speaker. 6. Enable Bluetooth pairing: On each speaker, activate the Bluetooth pairing mode by pressing the Bluetooth button or through the speaker’s app. This allows the speakers to be discoverable by your device. Connect to one speaker: From your device’s Bluetooth settings, locate the first speaker and select it to establish a connection. Using Directional Antenna. 1. Audio Mixer. To create sound effects with a Bluetooth speaker, you can put the microphone of an audio mixer close to the speaker and it will create feedback. This can be used to prank someone but care must be taken not to damage anything by creating too much feedback. 2. To use a device in combination with the neckband speaker via a BLUETOOTH connection, it is necessary to pair the neckband speaker with devices on an individual basis. Supported operation systems. Windows 10, Windows 8.1. Before proceeding, make sure of the following: Bring the neckband speaker within a distance of 1 m (3.2 ft) from your computer. ZJnH8.